If you cant find the media you're looking for
listed here please call us at (940)627-0112 from 8 am to 4:30 pm
Water slide Decal paper.
To make CLEAR/TRANSPARENT decals:
Apply a complete coating of
either Papilio Aerosol Decal Fixative (ASCF) or Krylon Crystal Clear
acrylic spray. Hold the can approximately one to two feet
from the printed sheet. Allow the sheet 30 minutes - 1 hour to dry.
Using either an Exacto knife or VERY sharp clean scissors cut your
decals from the sheet, leaving a border of at least 1/4" of clear
space around your design.
Applying the decal.
Dip your decal in warm water (not hot). the paper
will roll up and then straighten out again.
When the film starts to loosen from the paper,
place the paper on the substrate to be decorated, and slide the
paper out from under the decal.
Work out air bubbles with the decal squeegee and
let dry. It is important to remove all water and air from underneath
DO NOT cut out the decal first and then apply
the solution as the edges of the paper can absorb the liquid, making
it impossible to later slide the decal off the paper.
Friday, October 19, 2012